Victaulic Roll Grooving Equipment

RX Roller Set Stainless Steel SCH 10 and Below

RX Roller Set Stainless Steel SCH 10 and Below

RX Roller Set

RX Roller Set Stainless Steel SCH 10 and Below

RX Roller Set to suit stainless steel SCH 10 and below.

Operators Manual

Operators Manual

Recommended PPE

RX Roller Set to suit stainless steel SCH 10 and below.

Additional Information

Features:

For use with models VE272

,

Related Products

Hire

4 Inch Axxair Cutter C/W Bench

4 Inch Axxair Cutter C/W Bench

The Axxair cutter offers cutting without tube deformation and is ideal for thin wall stainless tubes and pipes. It provides a cut of quality geometry leaving a good surface condition.

Hire

Hilmor 15 - 35mm Stand Bender

Hilmor 15 - 35mm Stand Bender

A portable pipe bender to cover tube of 15-35 mm.

Hire

Tubela 15-54mm Ratchet Assisted Copper Bender

Tubela 15-54mm Ratchet Assisted Copper Bender

For all your tube bending requirements for copper, stainless steel, aluminium, conduit, mild steel tube. Not suitable for use with Litex tube. Litex tube will split and crack if bending is attempted.

Hire

ND-54 Tube End Notcher

ND-54 Tube End Notcher

ND-54 Tube End Notcher is used for cutting and dimpling the branched tube ends to enable the best possible flow characteristics. This is an accessory to the T60 T-Drill.

Rex Threading Machine 1/2 Inch to 4 Inch NPT c/w Pipe Support

Rex Threading Machine 1/2 Inch to 4 Inch NPT c/w Pipe Support

Rex Threading Machine N100A.

8 Inch Pulling Tool

8 Inch Pulling Tool

With the pulling tool no blocks, chains or machinery are needed and all operations can be carried out by one man. Simply place the tool on the pipes and pull them together.

Freeze Master 110v 8 - 61mm

Freeze Master 110v 8 - 61mm

The 690E is made to make building maintenance easy. Fitted with two high capacity freeze heads it is ideal for the engineer who needs to tackle the larger industrial and commercial pipe sizes.

Rems Amigo Conduit 16 to 32MM

Rems Amigo Conduit 16 to 32MM

Powerful, easy-to-operate electric tool for threading with unique, patented support bracket. Ready for use anywhere, without vice. Ideal for repair, renovation, job site.

Victaulic 272SFS Roll Grooving Machine 2 Inch to 8 Inch

Victaulic 272SFS Roll Grooving Machine 2 Inch to 8 Inch

Portable roll groover mounts easily to a Victaulic VPD752 or Rigid 300 power drive. Hand pump operation with a unique pivot arm design reduces handle effort. Tracking rolls reduce pipe walk-off. VE272SFS permitted for roll grooving thin wall carbon steel pipe 2 Inch to 12 Inch.

Victaulic 272SFS Roll Grooving Machine 2 Inch to 8 Inch C/W 300C Power Drive and Tristand

Victaulic 272SFS Roll Grooving Machine 2 Inch to 8 Inch C/W 300C Power Drive and Tristand

Portable roll groover mounts easily to a Victaulic VPD752 or Rigid 300 power drive. Hand pump operation with a unique pivot arm design reduces handle effort. Tracking rolls reduce pipe walk-off. VE272SFS permitted for roll grooving thin wall carbon steel pipe 2 Inch to 12 Inch.

RX Roller Set Carbon SCH 10 and Below

RX Roller Set Carbon SCH 10 and Below

RX Roller Set Carbon SCH 10 and Below.

Victaulic VE416 FSD 14 Inch to 16 Inch AGS Pipe

Victaulic VE416 FSD 14 Inch to 16 Inch AGS Pipe

The Victaulic VE416 Roll Grooving Tool Equipped with a pipe stabilizer for 6 Inch -16 Inch pipe sizes to control pipe sway. Groove depth adjuster provides precise groove dimensions and allows for easy adjustment for initial groove diameter.

Back to Victaulic Roll Grooving Equipment

Back to All Hire Equipment

Over 30 YearsExperience & Knowledge

Fast ShippingAcross UK Mainland

Wide & ExtensiveSelection of Tools