Rems Curvo 50 Bending Tool 32-50MM

Rems Curvo 50 Bending Tool 32-50MM

Rems Curvo

Rems Curvo 50 Bending Tool 32-50MM

Universal, compact electric tool for cold bending of pipes and tubes up to 90 degrees. Can be used anywhere, without vice.

Operators Manual

Operators Manual

Recommended PPE

Universal, compact electric tool for cold bending of pipes and tubes up to 90 degrees. Can be used anywhere, without vice.

Additional Information

Features:

wrinkle free bending of large pipes.
Instant use without setting.
Fast and creep speed operation for precise bending.
Rapid change of bending and back formers.

,

Related Products

Hire

Ridgid 258 Hydraulic/Powered Pipe Cutter 2 1/2 Inch to 8 Inch

Ridgid 258 Hydraulic/Powered Pipe Cutter 2 1/2 Inch to 8 Inch

The RIDGID Model 258 Power Pipe Cutter cuts 2 1/2 Inch (65 mm) to 8 Inch (200 mm) schedule 10*/40 steel pipe, galvanized pipe, rigid conduit, etc. Powered by the RIDGID No. 700 Power Drive (110v) or Ridgid 760 FXP Power Drive (60v cordless) , the 258 is a displacement cutter that provides square cuts.

Hire

Electric Water Test Pump Max. 1500PSI / 100BAR

Electric Water Test Pump Max. 1500PSI / 100BAR

The Hilta Electric Water Test Pump has a maximum Flow of 3.4 Litres/Min and a maximum pressure 1500psi / 100bar.

Hire

10 Inch Pulling Tool

10 Inch Pulling Tool

With the pulling tool no blocks, chains or machinery are needed and all operations can be carried out by one man. Simply place the tool on the pipes and pull them together.

Hire

Rubber Drain Test Bags 2 Inch to 6 Inch

Rubber Drain Test Bags 2 Inch to 6 Inch

Ideal for air testing pipe systems.

Ridgid 915 Portable Roll Groover 2 Inch to 6 Inch

Ridgid 915 Portable Roll Groover 2 Inch to 6 Inch

The RIDGID 915 Roll Groover is a manual roll groover for in-place field applications.

Fein Reciprocating Pipe Saw 100mm to 325mm C/W Clamp

Fein Reciprocating Pipe Saw 100mm to 325mm C/W Clamp

Hacksaw for pipes and profiled sections.

Ridgid Stud Cutter 10MM

Ridgid Stud Cutter 10MM

The 1390 Threaded Rod Cutter is designed to cut threaded rods used to hang pipes for air conditioning, sprinkler installations and other lightweight frames from the ceiling. Makes clean cuts without damaging thread.

ND-54 Tube End Notcher

ND-54 Tube End Notcher

ND-54 Tube End Notcher is used for cutting and dimpling the branched tube ends to enable the best possible flow characteristics. This is an accessory to the T60 T-Drill.

Viega Copper Kit 4 67-108MM

Viega Copper Kit 4 67-108MM

This kit comprises of a Viega Battery press tool complete with 67-108mm press rings and adaptors suitable for Viega Copper Profipress Systems.

Mapress Sprinkler Kit 4

Mapress Sprinkler Kit 4

LPCB approved Geberit Mapress 76.1mm press collar for use on stainless and carbon sprinkler systems. Suitable for use with ECO301.

Yorkshire Multi Layer Battery Tool 16-50MM

Yorkshire Multi Layer Battery Tool 16-50MM

This kit comprises of a REMS battery press tool inclusive of 16-50mm jaws for multi layer.

Yorkshire XPress Copper Kit 1 15-35MM

Yorkshire XPress Copper Kit 1 15-35MM

This kit comprises of a Novopress Cordless Mini Press tool (ACO103) complete with 15-35mm jaws suitable for XPress copper press fittings.

Back to Press Fitting

Back to All Hire Equipment

Over 30 YearsExperience & Knowledge

Fast ShippingAcross UK Mainland

Wide & ExtensiveSelection of Tools