Pipe Threading Machines

Drip Tray

Drip Tray

Drip Tray

For use under machines to protect floors etc.

Operators Manual

Operators Manual

Recommended PPE

For use under machines to protect floors etc.

Additional Information

Features:

Collects oil and drips
For use under machines to protect floors etc

,

Related Products

Hire

Ridgid 6S Pipe Roller Cutter 4 Inch to 6 Inch

Ridgid 6S Pipe Roller Cutter 4 Inch to 6 Inch

For fast clean pipe cutting.

Hire

T60 110v T Drill 15 - 54mm

T60 110v T Drill 15 - 54mm

The T-DRILL T-60 is a portable tee forming machine for copper tubes. It is an ideal solution for making tee joints in main run tube.

Hire

Ridgid 246 Snap Cutter up to 6 Inch

Ridgid 246 Snap Cutter up to 6 Inch

The Ridgid 246 Snap Cutter is quick and convenient to use and requires minimal clearance around the pipe.

Hire

RX Roller Set Stainless Steel SCH 10 and Below

RX Roller Set Stainless Steel SCH 10 and Below

RX Roller Set to suit stainless steel SCH 10 and below.

T60 110v T Drill 15 - 54mm

T60 110v T Drill 15 - 54mm

The T-DRILL T-60 is a portable tee forming machine for copper tubes. It is an ideal solution for making tee joints in main run tube.

10 Inch Pulling Tool

10 Inch Pulling Tool

With the pulling tool no blocks, chains or machinery are needed and all operations can be carried out by one man. Simply place the tool on the pipes and pull them together.

Ridgid Stud Cutter 10MM

Ridgid Stud Cutter 10MM

The 1390 Threaded Rod Cutter is designed to cut threaded rods used to hang pipes for air conditioning, sprinkler installations and other lightweight frames from the ceiling. Makes clean cuts without damaging thread.

REMS Multipush SLW Flushing Air and Water Test Pump

REMS Multipush SLW Flushing Air and Water Test Pump

Powerful, compact, electronic flushing and pressure testing unit with oil-free compressor.

Ridgid 1233C Threading Machine 1/2 Inch to 3 Inch NPT c/w Pipe Support

Ridgid 1233C Threading Machine 1/2 Inch to 3 Inch NPT c/w Pipe Support

Ridgid 1233C Threading Machine 1/2 Inch to 3 Inch NPT c/w Pipe Support.

Machine Guards

Machine Guards keep pedestrians away from moving pipe on threading equipment.

Ridgid 161 Receeder 4 Inch to 6 Inch

Ridgid 161 Receeder 4 Inch to 6 Inch

Increases capacity of 2 Inch or 3 Inch threader to 4 Inch.

Ridgid 1233 Threading Machine 1/2 Inch to 3 Inch BSP c/w Pipe Support

Ridgid 1233 Threading Machine 1/2 Inch to 3 Inch BSP c/w Pipe Support

Ridgid 1233 Threading Machine 1/2 Inch to 3 Inch BSP C/W Die Heads and Pipe Support.

Back to Pipe Threading Machines

Back to All Hire Equipment

Over 30 YearsExperience & Knowledge

Fast ShippingAcross UK Mainland

Wide & ExtensiveSelection of Tools