Grinding & Cutting

Grinding & Cutting

4 1/2 Inch 18v Cordless Grinder

4 1/2 Inch 18v Cordless Grinder

battery grinder

Makita

4 1/2 Inch 18v Cordless Grinder

This 4 1/2 Inch 18v Cordless Grinder offers a 22 minute charge time with the air cooled Makstar Optimum Charging System.

Operators Manual

Operators Manual

Recommended PPE

This 4 1/2 Inch 18v Cordless Grinder offers a 22 minute charge time with the air cooled Makstar Optimum Charging System.

Additional Information

Features:

22 minute charge time with the air cooled Makstar Optimum Charging System.
4 pole motor.
High comfort grips.
Lithium-ion batteries have greater life spans than their Ni-MH or Ni-Cad counterparts giving 430% greater run time.
Lithium-ion’s 40% weight saving means 18 volt power can be obtained by a battery that weighs the same as a 12 volt Ni-MH battery.
Anti-restart function with warning lamp.
Electronic current limiter with warning lamp.
Easy grip body.
Capable of using wheels or discs for mains grinders.

Specification:

Battery Type Lithium-ion
Battery Quantity (3.0 Ah) 2
Voltage 14.4 v
Bore Diameter 22 mm
Noise sound pressure 74 dB(A)
Noise K factor 3 dB(A)
Max Wheel Diameter 115 mm
No Load Speed 10000 rpm
Vibration K factor 1.5 m/sec²
Vibration: Sanding 2.5 m/sec²
Vibration: Artificial Wheel 8.5 m/sec²
Net weight 1.8 kg

,

Related Products

Hire

Ma615 Portable Bandsaw

Ma615 Portable Bandsaw

The MA 615 is an incredibly tough and hard-working portable bandsaw. The frame is jig welded 1/8 section steel for both strength and lightness.

Hire

STRUTSLAYR Strut Shear Head KIT, HEAD+CASE+ 41 mm x 21 mm DIE

STRUTSLAYR Strut Shear Head KIT, HEAD+CASE+ 41 mm x 21 mm DIE

The RIDGID© STRUTSLAYR™ delivers quality, burr-free strut channel cuts on the jobsite in 5 seconds or less. Supplied with RIDGID 32kN press tool*, the STRUTSLAYR strut cutter offers a clean, consistent cut with a simple pull of a trigger: no grinding or sawing sparks!

Hire

RIDGID RP350-B PRESS TOOL

RIDGID RP350-B PRESS TOOL

The RIDGID RP 350 features a brushless motor that is capable of over 100,000 press cycles and requires no scheduled maintenance. Get access to hard-to-reach locations with endless 360° swivel. With the most advanced LED interface and lighting, the RP 350 has been upgraded from top to bottom. This RP350 comes with a charger and one battery.

Hire

9 Inch Angle Grinder

9 Inch Angle Grinder

This 9 Inch Makita Angle Grinder offers double insulation and low vibration levels.

4 Inch Grinderette

<img src="https://www.broughtonplanthire.co.uk/wp-content/uploads/2021/05/j5x1i_makitagrinder.jpg" width="125" height="71" alt="4 Inch Grinderette" loading="lazy">

4 Inch Grinderette

This 4 Inch Grinder offers a high performance 840 watt motor with enough power to handle all the jobs required of a small angle grinder.

Hitachi Cordless Stud Cutter

Hitachi Cordless Stud Cutter

Hitachi Cordless stud cutter.

7 Inch Angle Grinder

7 Inch Angle Grinder

This Makita 7 Inch guide offers a large rubber tool rest protects work piece from scratches.

Hilti DCSE20 Wall Chaser

Hilti DCSE20 Wall Chaser

This wall chaser is equipped with 125mm discs (sold separately) and will cut depths to 40mm and widths up to 46mm. For insulation of pipe and conduits in walls.

Makita 18v Cordless Shark Saw

Makita 18v Cordless Shark Saw

Makita 18v Cordless Shark Saw operates on lithium-ion batteries that have greater life spans than their Ni-MH or Ni-Cad counterparts giving 430% greater run time.

14 Inch 2414 Chop Saw

14 Inch 2414 Chop Saw

The Makita 2414 Chop Saw offers a quick release vice and a large sized spark guard to prevent backward scattering of spark.

4 Inch Grinderette

<img src="https://www.broughtonplanthire.co.uk/wp-content/uploads/2021/05/j5x1i_makitagrinder.jpg" width="125" height="71" alt="4 Inch Grinderette" loading="lazy">

4 Inch Grinderette

This 4 Inch Grinder offers a high performance 840 watt motor with enough power to handle all the jobs required of a small angle grinder.

Makita Nibbler 110v 1.6mm Capacity

Makita Nibbler 110v 1.6mm Capacity

Makita nibbler 110v 1.6mm performs clean, precise cutting in keystone plate, deck plate and other corrugated/trapezoidal sheet materials.

Back to Grinding & Cutting

Back to All Hire Equipment

Over 30 YearsExperience & Knowledge

Fast ShippingAcross UK Mainland

Wide & ExtensiveSelection of Tools